Insect population dynamics in commercial grain elevators

Data were collected in 1998-2002 from wheat stored in commercial grain elevators in south-central Kansas. Bins at these elevators had concrete walls and were typically 6-9 m in diameter and 30-35 m tall. A vacuum-probe sampler was used to collect grain samples in the top 12 m of the wheat in each bin. The primary insect species found in the wheat samples were: Cryptolestes ferrugineus, Rhyzopertha dominica, and Tribolium castaneum. In the top 3.7 m of grain, R. dominica, C. ferrugineus, T. castaneum and Sitophilus oryzae made up 44, 36, 19 and 1% of the insects found in the samples, respectively. From 3.8 to 12.2 m, R. dominica, C. ferrugineus, T. castaneum and S. oryzae were present at 84, 8, 8, and 1%, respectively. The most prevalent species also changed over time. In June, the start of wheat harvesting and storage in Kansas, insect density was low in the bins. At this time, C. ferrugineus was the most common insect, and it was found mostly in the top grain sample (0-1.2 m). In September through November, C. ferrugineus and R. dominica were at similar densities; however, from February to March, R. dominica was more common.Generally, insect density was greatest at the top and decreased with grain depth. Very few insects were found in samples collected from greater than 12 m (most of the bins contained grain to depths of 24-36 m). Insect density for all species increased rapidly from June through October. During this period less than 20% of the bins had economically significant insect densities (>2 insects/kg). From October until February, the average insect density remained fairly constant but it was greatly reduced in April, May, and June. Bins that had insect densities >2 insects/kg tended to be located adjacent to other heavily infested bins.     

A sub-space method to detect multiple wireless microphone signals in TV band white space

The main hurdle in the realization of dynamic spectrum access systems from the physical layer perspective is the reliable sensing of low power licensed users. One such scenario shows up in the unlicensed use of the TV bands where the TV band devices are required to sense extremely low power wireless microphones (WMs). The lack of technical standards among various wireless manufacturers and the resemblance of certain WM signals to narrow-band interference signals, such as spurious emissions, further aggravate the problem. Due to these uncertainties, it is extremely difficult to abstract the features of WM signals and hence develop robust sensing algorithms. To partly counter these challenges, we develop a two-stage sub-space algorithm that detects multiple narrow-band analog frequency-modulated signals generated by WMs. The performance of the algorithm is verified by using the real WM signals experimentally captured under low SNR conditions. The problem of differentiating between the WM and other narrow-band signals is left as future work.     

Freeze-form extrusion fabrication of functionally graded materials

Presented in this paper is a novel additive manufacturing technology for making three-dimensional parts with functionally graded materials (FGMs), called Freeze-form Extrusion Fabrication (FEF). The system development included a triple-extruder mechanism, extruder modeling and control, pastes extrusion planning for desired composition gradients, and software coding for motion and extrusion control. The effectiveness of the developed FEF system was demonstrated first by fabricating limestone (CaCO₃) parts with graded colors and then by fabricating ‘green’ parts with graded compositions between alumina (Al₂O₃) and zirconia (ZrO₂). The fabricated part went through post-processing, and the sintered part was analyzed using energy dispersive spectroscopy (EDS) to determine its material compositions.     

Closed‐Loop Transmit Diversity Techniques for Small Wireless Terminals and Their Performance Assessment in a Flat Fading Channel

Closed‐loop transmit diversity is considered an important technique for improving the link budget in the third generation and future wireless communication standards. This paper proposes several transmit diversity algorithms suitable for small wireless terminals and presents performance assessment in terms of average signal‐to‐noise ratio (SNR) and outage improvement, convergence, and complexity of operations. The algorithms presented herein are verified using data from measured indoor channels with variable antenna spacing and the results explained using measured radiation patterns for a two‐element array. It is shown that for a two‐element array, the best among the proposed techniques provides SNR improvement of about 3 dB in a tightly spaced array (inter‐element spacing of 0.1 wavelength at 2 GHz) typical of small wireless devices. Additionally, these techniques are shown to perform significantly better than a single antenna device in an indoor channel considering realistic values of latency and propagation errors.     

Economic comparison of fuel cell powered forklifts to battery powered forklifts

This paper presents an economic comparison of fuel cell powered forklifts to various types of battery powered forklifts. The total costs of ownership of each technology is calculated and compared over their economic lifetimes and at varying workloads to determine the economic costs or benefits associated with each technology. The study is novel compared to the previous literature in that all data sources are referenced, it includes a model that is scalable by facility workload, and it includes the economic costs of hydrogen storage and charging infrastructure. Results show that fuel cell forklifts are more expensive to purchase and operate that battery powered forklifts for the types of facilities considered in this analysis. Fast charge forklifts are shown to be economically advantaged at high workloads relative to conventional battery-swapping forklifts.     

Behavior of Pt Atoms on Oxide Supports During Reduction Treatments at Elevated Temperatures,Characterized by Aberration Corrected Stem Imaging

Abstract  

Aberration-corrected scanning transmission electron microscopy at the sub-?ngstr?m resolution allows imaging the structure of catalytic materials at the single atom level and permits fundamental studies of the behavior of heavy metal catalytic species as a result of elevated temperature gas-treatments. The present study is aimed at understanding the development of clusters and nanoparticles of Pt on γ-alumina during reduction treatments of a pre-oxidized highly dispersed catalyst. A special built ex situ reactor and a specimen holder allowing cyclic anaerobic transfer between the reactor and microscope were used for the study. The number of atoms in a nascent cluster can be determined along with the general shape of the cluster. Reduction experiments without air exposure of the sample showed that although clusters are formed at 500 °C, many Pt atoms are not associated with the cluster and are still dispersed on the catalyst support. After a 700 °C reduction, all of the Pt atoms are associated with the clusters. Movement of the clusters on the catalyst support is different depending upon the catalyst support.